Marquee Cam Buckle (2 part+Karabiner)
- Specifically designed for erecting marquees
- Fitted with a loop at each end – one for fitting over the poles in the marquee roof, the other is a smaller stitched loop which is hooked over a stake and secured with a karabiner
- The Cam Buckle is 4m (measured from bearing point to bearing point)
- Colour – Black
- 25mm wide
- 250kg breaking strength
Due to a high stock turnaround time not every product will always come exactly as seen in the image. you may receive a product in a different shade or with small differences to the hardware itself. If you have a specific requirement please call us to confirm the spec on our current stock.
Our 250kg Cam Buckles are used for safely securing loads during transit. Our Cam Buckle straps are very high quality yet low priced. To use Cam Buckles you simply anchor the ends of the straps, wrap the webbing around the item to be secured and then pull the webbing through the buckle until the object is secure. The webbing is made from soft, hardwearing polyester. The benefit of these 250kg Cam Buckles for the user is that they have been specifically designed with the smaller application in mind.
Break/Load in kgs: 250
Width in mm: 25
Length in metres: 4
- 250KG Minimum Break Strength
- LC 125daN
- Strong, Hard wearing
- Individually Certified