800kgs Permanent Magnetic Lifter
- Designed for the transportation and lifting of steel, engine parts, goods and moulds
- Strong magnetic force
- Requires no electricity
- Highest pulling force is 3.5 times greater then the rated lifting capacity
"The Permanent Magnetic Lifter can be used in a variety of industries for the transportation and lifting of steel, engine parts, semi manufactured goods and moulds. Due to its magnetic force there is no need to use slings, clamps, or other holding devices eliminating damage to the surface of lifted goods. Special Features The Magnetic Lifters highest pulling force is 3.5 times greater than the rated lifting capability Light weight, ranging from 10-125kg Safe: No electricity is needed to operate the Magnetic Lifter. Once operated there is less than 1% residual magnetism.
The simple switch and safety button design slows for one handed operation Larger sizes available, output up to 6000kg How to determine the right type of Magnetic Lifter for your application The capacity of the lifting magnet is determined by the thickness and surface quality of the component. Before operation it is necessary to find out the percentage of the steel thickness of the component and capacity curve. If the components surface roughness (Ra) is less than 6.3 um, the magnetic lifter surface gap will not exist; the lifting capacity will be 100%. If the surface roughness (Ra) is above or greater than 6.3um, the lifter gap should be estimated"
Break/Load in kgs: 800
Colour: Green / Black
- Simple Switch and saftey button allows for one handed operation
- No Power Required
- Suitable For Lifting & Handling of Magnetic Materials
- (100kg Flat - 50kg Round) Magnetic Lifter
- Fully Certified